Challenges in Mechanics of Biological Systems and Materials, Thermomechanics and Infrared Imaging, Time Dependent Materials and Residual Stress, Volume 2

Chapter 1. Development of PEEK matrix polymer composite and additive manufacturing by pellet extrusion method.- Chapter 2. Parkinsonian Hand Tremor Mitigation with Enhanced Wearable Device.- Chapter 3. Quantitative Measurement of Viscoelastic Properties of Soft Membranes Subjected to Finite Deformations based on Optical Coherence Elastography.- Chapter 4. Open Source Contour Method Analysis for Assessing Residual Stress in Weldments.- Chapter 5. Variation of initial bulk residual stresses in aluminum alloy 7050-T7451 and its effect on distortion of thin-walled structural parts.- Chapter 6. On the Use of iDIC (Integrated Digital Image Correlation) for the Slitting Method.- Chapter 7. A rapid procedure to re-construct S/N curve by using harmonic components of thermal signal.- Chapter 8. Rapid Fatigue Characterisation via Infrared Thermography of AM-CM Composites.- Chapter 9. Condition Assessment by Thermal Emission (CATE) for in situ monitoring of fatigue crack growth.- Chapter 10. Effect of geometrical discontinuities on mode shapes stress maps using infrared thermography.- Chapter 11. Induction thermography: influence of testing parameters for different crack geometry.- Chapter 12. Numerical Simulation of the Heat Dissipation During the Fatigue Test.- Chapter 13. A full experimental characterization of aged Nitrile Butadiene Rubbers (NBR).- Chapter 14. Characterization of the Effect of Cold Joints and Functional Grading in Stepwise Constructed Tensile Dog Bones with Embedded Digital Image Correlation.