Solar Cells and Modules
Samenvatting
This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Specificaties
Inhoudsopgave
<p>1. Introduction</p>
<p>1.1. Photovoltaics: potential and orders of magnitude</p>
<p>1.2. Photovoltaics: a choice of technology</p>
<p>1.3. Photovoltaics: Technology evolution</p>
<p>1.4. Photovoltaics: Manufacturing chain and efficiency increases</p>
<p>1.5. Photovoltaics: Impact of technology on energy pay-back time</p>
<p>1.6. Beyond silicon single-junction solar cells.</p>
1.7. Building integrated photovoltaics.<p></p>
<p>1.8. PV in future energy systems</p>
<p>1.9. References</p>
<p>2. Solar Spectra</p>
<p>2.1. Interaction of sunlight and the earth’s atmosphere</p>
<p>2.2. Albedo</p>
<p>2.3. Indoor lighting</p>
<p>2.4. “Lux” as a unit of light measurement</p>
<p>2.5. Moonlight</p>
<p>2.6. Irradiance and irradiation</p>
<p>2.7. References</p>
<p>3. Solar Cells: Basics</p>
<p>Preamble: Some basic terms from semiconductor physics</p>
<p>3.1. The photovoltaic effect: Interaction of light and matter</p>
<p>3.2. Conversion of light into electricity by a diode </p>
<p>3.3. Separation of electrons and holes: the solar cell as diode</p>
<p>3.4. Solar cell characteristics, equivalent circuits and key parameters</p>
<p>3.5. Solar cell efficiency limits</p>
3.6. Spectral Response and Quantum Efficiency in Solar cells<p></p>
<p>3.7. References</p>
<p> </p>
<p>4. Solar Cells: Optical and Recombination Losses</p>
<p>4.1. Optical losses</p>
<p>4.2. Recombination losses</p>
<p>4.3. References</p>
<p>5. Crystalline silicon solar cells: Homojunction cells </p>
<p>5.1. Production of silicon wafers and solar cells</p>
<p>5.2. Cell processing for the Al-BSF cell</p>
<p>5.3. PERC cell (Passivated Emitter Rear Cell)</p>
<p>5.4. Other Homojunction cell concepts</p>
<p>5.5. References</p>
<p>6. Amorphous silicon solar cells</p>
<p>6.1. Amorphous silicon: deposition method and layer properties</p>
<p>6.2. Amorphous silicon solar cells</p>
<p>6.3. Microcrystalline silicon solar cells</p>
<p>6.4. References</p>
<p>7. Crystalline silicon solar cells: Heterojunction (HJT) cells</p>
<p>7.1. Introduction</p>
<p>7.2. Cell Structure</p>
<p>7.3. n- and p-type Wafers</p>
<p>7.4. Cell Process Steps</p>
<p>7.5. Temperature Coefficient of HJT Cells</p>
<p>7.6. Levelized Cost of Electricity (LCOE) of HJT cells </p>
<p>7.7. References</p>
<p>8. CdTe and CuInGaSe<sub>2</sub> thin-film solar cells</p>
<p>8.1. Thin-film polycrystalline materials</p>
<p>8.2. CIGS solar cells</p>
<p>8.3. CdTe/CdS solar cells</p>
<p>8.4. Flexible thin-film solar cells</p>
<p>8.5. In-line fabrication</p>
<p>8.6. Performance under critical conditions</p>
<p>8.7. Environmental aspects</p>
<p>8.8. References</p>
<p>9. Solar Module technology</p>
<p>9.1. Electrical layout of solar modules</p>
<p>9.2. Module architectures, materials and processes</p>
<p>9.3. Module testing, reliability and lifetime</p>
<p>9.4. References</p>
<p>10. Module deployment and energy rating</p>
<p>10.1. Preliminary remarks</p>
<p>10.2. From power rating to energy rating</p>
<p>10.3. Three relevant exceptions</p>
<p>10.4. Energy losses and failure modes</p>
<p>10.5. Simulation and monitoring: energy yield measurement</p>
<p>10.6. References</p>
<p>11. Solar photovoltaics on land, water, and buildings</p>
<p>11.1. Solar electricity for powering the word</p>
<p>11.2. Solar on land</p>
<p>11.3. Solar on water</p>
<p>11.4. Solar on buildings</p>
<p>11.5. Solar in developing countries</p>
<p>11.6. Solar everywhere</p>
<p>11.7. References</p>
<p>12. Solar PV Systems</p>
<p>12.1. Overview Solar PV Systems</p>
<p>12.2. The solar generator</p>
<p>12.3. Off-grid PV systems</p>
12.4. Grid-connected PV systems<p></p>
<p>12.5. Explanation of Symbols </p>
<p>12.6. References</p>
<p>13. Photovoltaics in the future energy system</p>
13.1. Market development<p></p>
<p>13.2. Regulatory issues</p>
<p>13.3. Sustainability</p>
<p>13.4. System integration</p>
<p>13.5. References</p>
<p> </p>
<p> </p>