Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications

<p>1. MICROSTRUCTURE AND CHARACTERIZATION</p> <p>1.1. Microstructural characterization of inconel 718 for future ultrasonic fatigue testing</p> <p> </p> <p>1.2. Geometry tool influence on the microstructure of MMC Al-SiC friction stir welds</p> <p> </p> <p>1.3. Development and characterization of a fiber metal laminates based on vinyl ester resin modified with polyurethane and reinforced with fiberglass</p> <p> </p> <p>1.4. Synthesis and characterization of alpha alumina platelets and acicular mullite in MgO-Al₂O₃-SiO₂ system</p> <p> </p> <p>1.5. Influence of forging strain and heat treatment on the grain size control for nickel base superalloy C263</p> <p> </p> 1.6. Study of the decomposition of martensite through DSC and the effect on nanomechanical properties in FV535 high Cr martensitic steel<p></p> <p> </p> <p>1.7. Design of a device for polymerizing composites with infrared emission</p> <p>  </p><p>2. CORROSION IN AEROSPACE MATERIALS</p> <p>2.1. Pre-corrosion attack effect under ultrasonic fatigue resistant in titanium alloy Ti-6Al-4V</p> <p> </p> 2.2. Effects of heat treatments in corrosion behavior of HVOF sprayed Ni-based alloy coatings<p></p> <p> </p> <p>2.3. Study of susceptibility to stress corrosion cracking of inconel 600</p> <p> </p> <p>2.4. Corrosion behavior of a austempered ductile iron used in the aeronautical industry, evaluated on acid solutions</p> <p> </p> 2.4. Corrosion resistance of aeronautical YSZ-8 thin films<p></p> <p> </p> <p>2.5. Wind tunnel to stress corrosion cracking test</p> <p> </p> <p>2.6. Passivation of stainless steel in the aeronautics industry</p> <p> </p> <p>3. AIRCRAFT STRUCTURES  </p> <p>3.1. Torsion fatigue test on the aeronautical aluminum alloys 6061-T6 and 6063-T5</p> <p> </p> <p>3.2. Performance study of dry friction anti-vibratory mount for avionics components under shock loading</p> <p> </p> <p>3.3. Structural analysis of sounding rocket fins</p> <p> </p> <p>3.4. Mechanical behavior of a composite detachable aircraft wing structure</p> <p> </p> <p>4. AEROSPACE COMPOSITES</p> <p>4.1. Design and manufacturing of a low cost device to control curing cycles in composite materials</p> <p> </p> <p>4.2. Modified vinyl ester resins as a suitable option of composite materials for application on wind turbine blades</p> <p> </p> <p>4.3. Geometry tool influence on microstructure of MMC Al-SiC friction stir welds</p>  <p></p> <p>4.4. Development of henequen glass fiber epoxy laminate composite to use in unmanned aerial vehicles</p> <p> </p> <p>4.5. Mechanical properties of polypropylene composites and carbon allotropes</p> <p> </p> <p>4.6. Development and characterization of a fiber metal laminate based on vinyl ester resin modified with polyurethane and reinforced with fiberglass</p>   <p>4.7. Fabrication of jute fiber-reinforced composite materials by hand lay-up and infusion techniques assisted by vacuum</p> <p> </p> <p>5. NUMERICAL MODELLING</p> <p>5.1. Grain size effect during hot ring rolling process using nickel-based superalloy by FEM</p> <p> </p> 5.2. Finite element modelling of friction stir spot welding (FSSW) of Ti-6AL-4V<p></p> <p> </p> <p>5.3. Effect of flow pattern on microstructure of disk forging superalloy</p> <p> </p> <p>5.4. Mathematical simulation of concomitant nitride layers growth in 2-D cylindrical coordinate system</p>